Educational Background

1993 – 1997, Tohoku University, Doctor, Mechanical science and engineering;

1989 - 1992, Zhejiang University, Master, Material science and engineering;

1983 - 1987, Zhejiang University, Bachelor, Material science and engineering.

Professional Experience

2015 – so far, Professor, School of Mechanical and Aerospace Engineering.

Research Interests

Micro Nano Science & Engineering, including:

1. Micro / Nano Electro Mechanical System （MEMS / NEMS);

2. Micro-Manufacturing / Micro-Machining;

3. Micro Nano Tribology;

4. Intelligent Informative Mechanical Systems.

Research Projects

2013 National Institute of Advanced Insdustrial Science & Technology of Japan: Micro parallel reactors;

2011 National Institute of Advanced Insdustrial Science & Technology of Japan: Simultaneous nanofabrication of Au nanogap by electron migration and surface deposition;

2009 SHINTO Scientific Co., Ltd. Japan:Ultra low load (< 0.1g) surface performance testing machine (Tribogear Series Type 36).

Selected Publications

1. Cao Xia, Dong F. Wang, Takahito Ono, Toshihiro Itoh, Ryutaro Maeda, A mass multi-warning scheme based on one-to-three internal resonance Elsevier Mechanical Systems and Signal Processing (Volume: 142) (IF=6.471).March, 2020, 142 (2020) 106784, https://doi.org/10.1016/j.ymssp.2020.106784 (14pp);

2. Dong F. Wang, Luwei Zheng, Xu Yang, Yupeng Fu, Yuji Suzuki, A Spider-web Design for Decreasing Eigen-frequency with Increasing Amplitude in A PE/ME Composite Energy Convertor IEEE Transactions on Industrial Electronics (Volume: 142, Issue: 00) (IF=7.515), April 2020, IEEE Xplore 22?, 142 (2020) 106784, Article DOI: 10.1109/TIE.2020.2988188 (9pp);

3. Ziqi Zhao, Dong F. Wang, Xueqiao Lou, Takahito Ono, Toshihiro Itoh, An Adjustable Pre-stress Based Sensitivity Enhancement Scheme for Cantilever Based Resonant Sensors,Elsevier Mechanical Systems and Signal Processing (Volume: 146, Issue: 00) (IF=6.471), May 2020, 146 (2021) 107002, https://doi.org/10.1016/j.ymssp.2020.107002 (14pp);

4. Ziqi Zhao, Dong F. Wang, Yipeng Hou, Toshihiro Itoh, Ryutaro Maeda, Non-invasive Passive Measurement of Multiphase Currents in IoT IEEE Transactions on Industrial Electronics (Volume: 142, Issue: 00) (IF=7.515), November 2020, IEEE Xplore, 142 (2020) 106784, Article DOI: 10.1109/TIE.2020.3037988 (10pp);

5. Xu Du, Dong F. Wang, Cao Xia, Shimoyama Isao, Ryutaro Maeda, Internal resonance phenomena in coupled ductile cantilevers with triple frequency ratio Part II Experimental observations IEEE Sensors Journal (Volume: 19, Issue: 14) (IF=3.076), March 2019, IEEE Xplore, Article DOI: 10.1109/JSEN.2019.2907966 (9pp: 5475 - 5483);

6. Shenlai Wan, Dong F. Wang, Toshihiro Itoh, Shimoyama Isao, Ryutaro Maeda, A deviation decreasing methodology: verified with a piezoelectric current sensor IEEE Sensors Journal (Volume: 19, Issue: 23) (IF=3.076), July 2019, IEEE Xplore, Article DOI: 10.1109/JSEN.2019.2933861 (9pp: 11120 - 11128);

7. Dong F. Wang, Xuesong Shang, Minghua Lv, Yang Li, Toshihiro Itoh, Ryutaro Maeda, A detection error correction scheme aiming at gradient nonlinear problem in cantilever based sensors IEEE Sensors Journal (Volume: 19, Issue: 00) (IF=3.076), August 2019,IEEE Xplore, Article DOI: 10.1109/JSEN.2019.2936883 (8pp: 0000 - 0008);

8. Ziqi Zhao, Dong F. Wang, and Toshihiro Itoh, A passive AC/DC current sensing methodology for diverse multiline cables AIP Applied Physics Letters (Volume:115) (IF=3.521), August 2019, Cite as Appl. Phys. Lett. 115, 193504 (2019), http://doi.org/10.1063/1.5121605 (5pp).

9. Dong F. Wang, Huan Liu, Xuesong Shang, Weikang Xian, Yipeng Hou, Xu Yang, Toshihiro Itoh, Ryutaro Maeda, Micro Electro Mechanical Systems, Springer-Verlag Book, August 2017 (30pp), Part of Springer Science+Business Media, Chapter: Passive MEMS DC electric current sensors applicable to two-wire appliances;

10. Dong F. Wang, Xu Du, Xiaodong Li, Di Zhou, Cao Xia, Jiajun He, Mengyuan Mao, Xin Liu, Xin Wang, Ryutaro Maeda,Micro Electro Mechanical Systems, Springer-Verlag Book, June 2017 (30pp), Part of Springer Science+Business Media, Chapter: Picogram-order mass sensors via cantilever-based micro/nano structures.

Courses

Electron Microscopy, Chinese, bachelor;

Scientific English, English, bachelor;

Mechanical physics, Japanese, bachelor;

Introduction to mechanical engineering, Japanese, bachelor, Co-Teaching;

Measurement Engineering, Japanese, bachelor;

Precision Micromachining, Japanese, bachelor;

Lectures by Professors, English, bachelor, Co-Teaching;

Smart Sensing for Intelligent Machinery, English, bachelor;

Freshman Seminar, English, bachelor, Co-Teaching;

Material Processing, Japanese, master;

Characteristics of Precision Micromachining, Japanese, master;

Scientific English, English, master;

Tribology, Japanese, master;

Fundamentals of Micro Manufacturing and Micro Systems, English, master;

Fundamentals of Micro Nano Tribology, English, master, Co-Teaching with Dr.Xin Liu;

MEMS and Microsystems Design and Manufacture, English, master;

High Performance Machining of Materials, Japanese, doctor;

Fundamentals of Micro Nano Science and Engineering, English, doctor;

Frontier Technology and Applications of MEMS and Microsystems, English, doctor;

Patents and Applications

1. A peristaltic multi gait robot, ZL 2019 2 2117306.6, China;

2. A new high precision and low noise DC high current detection device, ZL 2017 1 0985773.8, China;

3. A resonant gas sensing device based on mode localization, ZL 201821630882.X, China;

4. An additive manufacturing equipment for three-dimensional structure of micro system, ZL 201821696405.3, China;

5. Trigger sensor based on parametric excitation and synchronous desynchronization resonance, ZL 2018 2 1467951.X, China;

6. High sensitivity piezovoltage resistance capacitance superimposed force sensor based on synchronous resonance, ZL 2016 1 0171506.8, China;

7. Electric field assisted precision forming device with two-stage control, ZL 2015 1 0182732.1, China;

8. Device and method for wireless, passive, non-contact and multi wire measurement of DC current, ZL 2017 1 0027636.9, China;

9. An additive manufacturing device forming port with stepless regulation of discharge port sectional area, ZL 2015 1 0177407.6, China;

10. A miniature piezoelectric and capacitive composite vibration energy collector, ZL 2015 1 0027934.9, China;

11. An accurate positioning device for rapid switching of multi forming ports and multi feeders, ZL 2015 1 0177455.5,China;

12. Intelligent manufacturing technology of micro machinery (individual device or unit), 201510177407.6；201510177455.5；201510182732.1, China;

13. Current Sensor Using Piezoelectric Thin Film,No. 2014-016207, Japan;

14. Nano-gap Electrodes and Its Micro-manufacturing Methods, No. 2013-045913, Japan.

Other Professional Activities

1.Tsukuba Innovation ArenaChair of Inter-university Networking Committee;

2.Inter. Conf. on Nano/Micro Engineering and Molecular System (IEEE NEMS)Technical Programme Committee Member & Session Chairperson;

3.Special reviewers of 17 international SCI source journals including: Sensors and Acutators A. Physical (Elsevier); Nanotechnology (IOP science); Applied Physics Letters (AIP); IEEE Sensors Journal (IEEE); Microsystem Technologies (Springer-verlag) and so on;

4.IEEE SENSORS 2017 Paper Reviewer;

5.Member of JSME (Japanese Society of Mechanical Engineering);

6.Senior member of MEMS Industry Forum;

7.Hebei Province Science and technology award evaluation experts;

8.Member of IEEJ (Institute of Electrical Engineers of Japan);

9.Jilin Province Science and technology award evaluation experts;

10.Senior member of Japan Society of Next Generation Sensor Technology;

11.National Institute of Advanced Industrial Science and Technology （AIST）Visiting Researcher;

12.Inter. Symposium on Design, Test, Integration & Packaging of MEMS/MOEMS (IEEE DTIP)Programme Committee Member; Session Chairperson;

13.Member of China Society of micron and Nanotechnology;

14.Evaluation expert of ISIS system of NSFC;

15.Japan-China-Korea Joint Conf. on MEMS/NEMS (JCK MEMS/NEMS)Executive Committee Member & Session Chairperson; Vice Chair of Organizing Committee; Advisory Committee Member; Best Presentation Award Committee.

Honors and Awards

2019 Jiangxi Province, Science and technology award evaluation experts;

2019 Jilin University, Co chairman of the 10th JCK MEMS / NEMS 2019.